Introduction

Introduction#

Welcome to the course Mechanics 4RA00. In this course you will learn to analyse truss and beam structures and determine forces, bending moments, strains and stresses. We expect you to work through the course in sequential order.

The intended learning outcomes of this course are: …

  • Analyse the force distribution and reaction forces in a statically determinate truss structure using global equilibrium, the method of joints and the method of sections.

  • Analyse the shear force and bending moments in a simple beam structure loaded with discrete forces, discrete moments and constant distributed lateral force.

  • Determine the displacement and/or stiffness of a truss structure under external load.

  • Evaluate the displacement and/or stiffness of a beam structure using the “standard formulas (vergeet-mij-nietjes)”, the principle of superposition, principle of rigid body rotation (“kwispelen”) and/or virtual fixes.

  • Evaluate the stresses in a beam under the influence of bending moments, using the second moment of area of the cross section of the beam.

  • Determine the distribution of torques and the angle of twist due to torsion of cylindrical shafts.

  • Analyse an axially loaded beam in compression using radius of gyration, slenderness ratio, and boundary conditions near the ends.

  • Analyse uniformly loaded thin shells in the form of cylinder and spheres.

  • Analyse simple truss structures with a commercial FEM package

These lecture notes are now newly available in online format, with this there might be errors or incoherences with the material. When this is the case please contact M.E.A.Zakhari@tue.nl such that these issues may be addressed.